Section Key Points
What is Poll Pressure? Poll pressure is the force applied to a horse's poll through the bridle, varying with the type of bit and rein tension.
Potential Negative Effects
  • Pain and Discomfort: Can lead to head-shyness and cranial nuchal bursitis.
  • Behavioural Issues: Head tossing, tilting, and refusal to jump.
  • Training Setbacks: Reduced willingness to perform tasks requiring head and neck flexion.
Potential Positive Effects
  • Communication: Helps in asking the horse to lower its head and neck for maneuvers.
  • Control: Provides better control in high-stress situations.
Common Causes of Poll Pain
  • Traumatic Injuries: Accidents causing soft tissue injuries.
  • Overuse Injuries: Repetitive motions leading to muscle tightness.
  • Dental Issues: Problems with teeth or jaw causing pain.
Treatment Options
  • Veterinary Care: Anti-inflammatory medications or surgical procedures for severe cases.
  • Physiotherapy: Regular massage and physiotherapy to alleviate muscle tightness.
  • Proper Tack Fitting: Ensuring correct fit to prevent unnecessary poll pressure.
Preventing Poll Pressure Issues
  • Choose the Right Bit: Select a bit that suits your horse's sensitivity and needs.
  • Regular Tack Checks: Ensure bridle fits well and adjust noseband and headpiece.
  • Monitor Your Horse: Check for signs of discomfort or behavioural changes.
Is Poll Pressure Bad for Your Horse?

Poll pressure is a common term in equine management, but understanding its implications for your horse's health and performance is crucial. This blog explores what poll pressure is, its potential effects, and how to manage it effectively to ensure your horse's well-being.

What is Poll Pressure?

Poll pressure refers to the force applied to a horse's poll (the area just behind the ears) through the bridle. This pressure can vary significantly depending on the type of bit used and the amount of rein tension applied by the rider. According to Lucy Walton, a product specialist at Neue Schule, "There will be a degree of pressure applied to the poll before you even pick up your reins. This is simply down to the weight of the bit in your horse’s mouth putting tension on the cheek pieces and, in turn, on the headpiece and poll".

Read more about Neue Schule's Poll Pressure Guide.

Is Poll Pressure Harmful?

The effects of poll pressure on a horse can be both positive and negative, depending on various factors such as the type of bit, the horse's sensitivity, and how the rider uses the reins. Here are some key points to consider:

Potential Negative Effects

Pain and Discomfort

Poll Pressure Pain

Excessive poll pressure can cause significant discomfort and pain. This can lead to head-shyness, resistance to bending, and reluctance to move forward. In severe cases, it can result in inflammation of the bursa in the poll region, known as cranial nuchal bursitis. Read more on this from TheHorse.com's article.

Behavioural Issues

Behavioral Issues in Horses

Horses experiencing discomfort from poll pressure may exhibit behavioural changes such as head tossing, tilting, and refusal to jump. These behaviours often indicate that the horse is trying to avoid the discomfort caused by the pressure. Discover more insights at Practical Horseman Magazine.

Training Setbacks

Training Setbacks

Persistent poll pressure can hinder a horse's training progress. If a horse is constantly uncomfortable, it will be less willing to perform tasks that require head and neck flexion, leading to training difficulties. Learn more from YourHorse.co.uk.

Potential Positive Effects

Communication

Horse Communication

When used correctly, poll pressure can be a useful tool for communication between the rider and the horse. It can help in asking the horse to lower its head and neck, creating the desired flexion for certain maneuvers. Find out more from ResearchGate's study.

Control

Horse Control

Bits that apply poll pressure can provide better control, especially in high-stress situations like cross-country courses. However, it's essential to use these bits correctly to avoid causing discomfort. Check out more details at TheBitFitter.com.

Diagnosing and Treating Poll Pain

Poll pain can be challenging to diagnose because it often manifests as vague symptoms like head sensitivity or poor performance. According to Dr. Sue Dyson, "Genuine primary poll pain is very unusual. A lot of people suspect it’s poll pain because the horse gets head-shy or tilts his head when working, but these problems are often secondary to something else".

Common Causes of Poll Pain

Traumatic Injuries

Traumatic Injuries in Horses

Accidents such as pulling back while tied or falling can cause soft tissue injuries around the poll. Understanding the causes can help prevent such injuries. More information can be found at TheHorse.com.

Overuse Injuries

Overuse Injuries in Horses

Repetitive motions or prolonged flexed head and neck postures can lead to muscle tightness and discomfort in the poll region. Discover prevention tips from Practical Horseman Magazine.

Dental Issues

Problems with the teeth or jaw can also cause pain that manifests in the poll area. Regular dental check-ups can help prevent such issues. Learn more from YourHorse.co.uk.

Treatment Options

Treatment for poll pain depends on the underlying cause. Options include:

  • Veterinary Care: For conditions like cranial nuchal bursitis, veterinary intervention is necessary. This may involve anti-inflammatory medications or, in severe cases, surgical procedures.
  • Physiotherapy: Regular massage and physiotherapy can help alleviate muscle tightness and improve flexibility in the poll region.
  • Proper Tack Fitting: Ensuring that the bridle and bit fit correctly can prevent unnecessary poll pressure and discomfort. Modern anatomical bridles are designed to distribute pressure more evenly, reducing the risk of poll pain.

Preventing Poll Pressure Issues

Preventing poll pressure-related problems involves a combination of proper tack selection, correct riding techniques, and regular health checks. Here are some tips:

Choose the Right Bit

Select a bit that suits your horse's sensitivity and your riding needs. Avoid bits that apply excessive poll pressure unless absolutely necessary.

Regular Tack Checks

Ensure that your bridle fits well and is not causing undue pressure on the poll. Adjust the noseband and headpiece to allow some space and prevent tightness.

Monitor Your Horse

Pay attention to signs of discomfort or behavioural changes that may indicate poll pain. Regularly check your horse's poll area for sensitivity or tightness.

Conclusion

Poll pressure is a complex issue that requires careful management to ensure your horse's comfort and performance. While it can be a useful tool for communication and control, excessive or improper use can lead to pain and behavioural issues. By understanding the causes and effects of poll pressure and taking steps to prevent and treat related problems, you can help your horse stay healthy and happy.

Asked by You

What does poll pressure do to a horse?

Poll pressure can influence a horse's behaviour and comfort. While it can help with communication and control during riding, excessive poll pressure can cause discomfort, pain, and behavioural issues such as head-shyness and resistance to bending.

What causes poll tension in horses?

Poll tension in horses can be caused by several factors, including improper fitting of tack, excessive rein pressure, traumatic injuries, overuse injuries, and dental problems. Ensuring the correct fit and usage of tack can help minimize poll tension.

How to help a horse with a tight poll?

To help a horse with a tight poll, consider regular physiotherapy and massage to alleviate muscle tightness, ensure proper tack fitting to prevent unnecessary pressure, and consult a veterinarian if the problem persists. Regular check-ups and adjustments to the bridle and bit can also be beneficial.

What is the best bit to relieve poll pressure?

The best bit to relieve poll pressure depends on the individual horse's sensitivity and needs. Generally, bits that distribute pressure more evenly and are designed to minimize poll pressure, such as snaffle bits, are recommended. Consulting with a tack specialist can help in selecting the most suitable bit for your horse.